How do I set PDF plan scale manually?

Choose two known points on the plan, enter the real-world dimension, and MetreMate uses that to set the scale for the rest of your measurements.

Can I manually scale unusual or scanned plans?

Yes. That is exactly where Manual Scaling helps most, because you are not relying on the PDF to expose usable scale information.

Can I set the scale again after I start?

Yes. If you want to reset the scale or verify it again, you can set it again inside the workflow.

Is Manual Scaling included in the free plan?

Start for free with no credit card, then take the paid tier for a 7-day spin if you need more. The pricing page shows exactly what each plan includes.

What if my plan has no scale bar or printed scale note?

That is exactly what Manual Scaling is for. Pick any dimension on the sheet you can trust, a wall length or a door width you know, click its two ends, and enter the real distance to set the scale.

How is Manual Scaling different from Auto Scale?

Auto Scale reads likely scale cues and suggests a value to get you moving fast. Manual Scaling is the hands-on option for when a sheet is scanned, old, or unusual and you want to set the baseline yourself off a dimension you trust.

Does the scale apply to everything I measure after?

Yes. Once you set the scale on the sheet, it carries through every length, area, perimeter, and count you take on it, so the whole takeoff is grounded in the one verified baseline.

Feature

Manual Scaling

Set PDF plan scale with confidence before you quote

Manual Scaling gives you full control to set the scale by hand when you need it on unusual, older, or hard-to-read plans.

Start free Explore features

Set the scale from two known points
Enter a real-world dimension you trust
Measure scaled plans with more confidence

Scale Tool

Interactive demo

Click the plan, then scroll to zoom

Click both ends of the 8290 dimension under the plan

Scale not set · Page 6100% · No scale

Interactive example on a sample plan. The real MetreMate app does a lot more.

From problem to outcome

From uncertain plan scale to quote-ready measurements

When the plan is messy, scanned, or just plain inconsistent, Manual Scaling gives you the control to set the scale by hand and trust the numbers you are working from.

Step 1

Pick two known points

Use a dimension on the sheet that you can verify and anchor the scale to something real.

Step 2

Enter the real distance

Type the value once and let MetreMate apply that scale across your measurement workflow.

Step 3

Measure with confidence

Move into lengths, areas, and counts knowing the baseline is set properly.

Key capabilities

What you can do with Manual Scaling

Set scale from two points

Click two known points on the plan and set the scale without mucking around with external tools.

Best for Builders and estimators

Real-world measurement entry

Use a dimension you trust so your plan scale is based on something meaningful, not a guess.

Best for Renovators on older plans

Control unusual sheets

Handle plans where printed scale notes are missing, unreliable, or distorted from scanning.

Best for Odd PDFs and council plans

Reset when needed

Set the scale again quickly if a sheet changes or you want to verify the baseline before continuing.

Best for Multi-sheet takeoffs

Support accurate measuring

Feed a stronger baseline into every length, area, perimeter, and count that follows.

Best for Quote-critical jobs

Explore every feature Read the how-to guides

Measuring a printed construction plan by hand with a pencil

A printed floor plan measured with a tape measure and pencil

Boxes crammed with rolled-up paper plans

The old way

Bad scale setup creates expensive quote risk

If the baseline is wrong, everything else gets shakier. That usually means double-checking work later, revisiting quantities, or finding out on site that the plan never matched the quote.

Guessing scale can lead to wrong material quantities
Printed scale notes are not always reliable on scanned sheets
Rechecking after the fact slows down the whole job

Why it’s better with MetreMate

Manual control when accuracy matters most

Manual Scaling gives you a cleaner way to set the scale before the quote depends on it, especially when the sheet needs a hands-on check.

Set scale manually with a simple workflow
Reduce quote risk from dodgy plan setup
Handle old, scanned, or unusual drawings better
Measure with more confidence before ordering or pricing
Keep the whole takeoff grounded in a verified baseline

Testimonial / proof

“Been using MetreMate for a few months now, and I'm wondering how I ever managed without it. The accuracy is spot-on, and helps me and my tradies. I'm able to quote quicker and more accurately. Absolute lifesaver for every builder.”

Mina E. · Builder · Melbourne, VIC

Built for who

Built for the people doing the work

See how Manual Scaling fits the way your trade already works.

Built for

Renovators

The problem

Often deal with older PDFs where printed scale is not enough to trust.

What you get

Better measurements before ordering and planning trades.

How you'd use it: Use Manual Scaling against a known dimension you can verify on the plan.

“MetreMate's a real game-changer for me. Knocked off hours of fiddling around with plans and got straight into the real work. It's like having an extra pair of hands on site. Any tradie not on this is missing out, big time!”

Mark B., Bathroom Renovator, Sydney, NSW

Workflows for renovators

Across the trades