Question 1

How do you measure insulation from a plan?

Accepted Answer

Set the scale on the plan, then trace the ceiling and floor areas in square metres and work walls from the perimeter and ceiling height. Keep each scope on a layer so nothing is double counted, then convert the areas to batt packs at the specified R-value. MetreMate totals the areas for you.

Question 2

How many insulation batts do I need from a plan?

Accepted Answer

Measure the wall, ceiling and underfloor areas in square metres, then divide each by the coverage per pack (around 6 to 10 square metres depending on width) for the required R-value and add your wastage. MetreMate gives you clean areas straight off the PDF.

Question 3

Can I measure ceiling and wall insulation separately?

Accepted Answer

Yes. Use layers to keep ceiling, wall and underfloor areas apart, so each scope is measured once and converted to the right product and R-value without overlap.

Question 4

How do I measure wall insulation area from a plan?

Accepted Answer

Measure the external wall runs in lineal metres with the perimeter tool, deduct the window and door widths, then multiply by the ceiling height to get the net wall area in square metres. MetreMate gives you the wall runs off the plan, and you convert the area to wall batt packs at the specified R-value.

Question 5

How do I match batt packs to the R-value on a plan?

Accepted Answer

The plan or energy report names the R-value for each element, such as R2.5 walls and R6.0 ceilings, and coverage per pack changes with batt thickness and width. Measure each element's area in MetreMate, then divide by the coverage of the correct pack for that R-value so ceiling and wall quantities stay separate.

Question 6

How do I estimate underfloor insulation from a plan?

Accepted Answer

Trace the suspended floor area in square metres with the area tool, matching the footprint above the subfloor or on the lower storey. MetreMate totals the area, then you convert to underfloor batts or board at the required R-value and add a small allowance for trimming around bearers and services.

Wall, ceiling and floor areas for batt quantities

The slow way, or the smart way

Everything you can measure off the plan

Lengths & lineal metres

Areas in m²

Perimeters

Counts

How insulation suppliers use MetreMate

Area by scope

Packs by R-value

Keep scopes separate

More than measuring

Auto Scale

Manual Scaling

Auto Snap

Layers Manager

Print & Share

Project Organiser

Questions insulation suppliers ask

MetreMate works for every supplier

Ready to quote faster, insulation suppliers?