Can I count power points and light fittings across sheets?

Yes. The Count tool lets you tally GPOs, lights, switches, and data outlets across every sheet, keeping a running total so nothing is missed on the quote.

Can I measure cable and conduit runs?

Measure sub-main, lighting, and power circuit runs directly on the electrical plan once the scale is set, which is far quicker than scaling off a printout.

Can I keep circuits separate?

Use layers to organise counts and runs by circuit or area, so rough-in and fit-off are easy to quote and coordinate.

How accurate is counting points off an electrical plan?

The Count tool tallies every GPO, light, switch, and data outlet you click, keeping a running total so the count is exact. That is far more reliable than eyeballing a busy sheet and hoping you did not miss a point.

How do I estimate cable lengths for a job?

Measure each circuit run on the plan with the Measure tool and MetreMate totals the lineal metres, then add your allowance for drops and rises. That gives you cable and conduit quantities based on the drawing rather than a guess.

Can I count points and measure runs on site?

Yes, on a laptop. It runs in the browser on any Windows or Mac computer, so you can check a point count or a cable run against the plan on site, with nothing to install and a free plan to start.

MetreMate for Electricians

Measure electrical plans and count points fast

Count power points, light fittings, and switches, and measure cable runs straight from electrical plans, no printing, no scale ruler.

Try MetreMate, it's free See how it works

No credit card needed. Free plan to start, works on Windows and Mac.

Under 90s to your first measurement

Why electricians choose MetreMate

Electricians use MetreMate to count points and measure cable runs straight from electrical plans, without printing a sheet. Count downlights, light fittings, exhaust fans, appliances, GPOs, and switchboards with the Count tool, and use the Measure or Perimeter tool to work out wiring and LED runs for rough-in and fit-off quotes. It runs in your browser on any Windows or Mac computer, so you can check a plan on site or in the office.

See how MetreMate compares

Quote in minutes, not hours

Set the scale once and measure straight off the PDF. Your first measurement takes under 90 seconds, and it's free to start.

Try MetreMate, it's free

No credit card needed

The slow way, or the smart way

What changes when electricians measure in MetreMate instead of off a printout.

Without MetreMate

Counting GPOs, lights, and switches by hand across sheets
Estimating cable and conduit runs from small-scale plans
Printing electrical drawings just to quote

With MetreMate

Count tool for downlights, GPOs, fans, and switchboards
Measure and Perimeter tools for wiring and LED runs
Layers Manager to separate circuits
PDF zoom and pan
Pencil tool for freehand mark-ups, and to add your initials or signature by hand

500+

Tradies using MetreMate

50,000+

Measurements taken

90s

Average time to measure

Everything you can measure off the plan

Set the scale once, then pull the quantities electricians actually quote on.

Lengths & lineal metres

Any distance, edge, or run measured straight off the plan.

Areas in m²

Trace rooms, slabs, and zones for instant square metres.

Perimeters

Boundary and edge runs totalled for you, no maths.

Counts

Tap to count fixtures, fittings, and symbols with live totals.

Step by step

How electricians use MetreMate

1
Point counts
Use the Count tool to tally downlights, light fittings, exhaust fans, appliances, GPOs, and switchboards across every sheet.
2
Wiring and LED runs
Use the Measure or Perimeter tool to work out how much wiring or LED strip you need.
3
Quoting fit-outs
Combine point counts and cable lengths to quote rough-in and fit-off accurately.

Read our how-to guides