Does Auto Scale work on any PDF plan?

Auto Scale works on standard PDF plans and picks up the likely scale automatically. If a sheet is unusual or hard to read, switch to Manual Scaling and keep measuring.

Can I still set the scale manually?

Yes. Auto Scale is there to speed up setup, not lock you in. If you want full control, you can set the scale yourself.

Will this help on multi-page projects?

Yes. It is especially useful when you are opening lots of sheets and want to get into the takeoff workflow faster.

Is this included in the free plan?

You can start free with no credit card, and there's a 7-day trial of the paid tier if you want the lot. The pricing page breaks down what sits in each plan.

How does Auto Scale work out the scale of my plan?

It reads likely scale cues from the drawing when you upload the PDF and suggests a value for you to confirm. That gets you past the slowest part of setup so you can start measuring sooner.

What if the suggested scale looks wrong?

You review the suggestion before it is applied, so you never get locked into a bad value. If it does not match the sheet, switch to Manual Scaling and set the scale off a known dimension.

Should I double-check the scale before I quote?

It is worth it. Measure a dimension you already know off the plan and see that it reads true, then you can trust every length and area that follows. Auto Scale gives you the quick start and Manual Scaling is there for the hands-on check.

Feature

Auto Scale

Start measuring sooner with plan scale suggestions

Auto Scale reads likely scale cues from the plan so you can move from upload to measuring without wasting time on setup.

Start free View pricing

Spot likely scale values from the plan fast
Cut setup time before takeoff starts
Move into lengths, areas, and counts sooner

From problem to outcome

From upload to quote-ready measurements

Auto Scale helps you get through the slowest part of digital takeoff faster. Instead of hunting around for scale notes or setting everything by hand, you can confirm the likely scale and keep moving.

Step 1

Upload the plan

Open the PDF and let MetreMate read the drawing before you start clicking around.

Step 2

Confirm the suggestion

Review the likely scale value and apply it straight away when it matches the sheet.

Step 3

Measure without delay

Start your takeoff sooner with less setup drag and fewer avoidable mistakes.

Key capabilities

What you can do with Auto Scale

Detect likely plan scale

Pick up likely scale values from the drawing so you spend less time hunting around before measuring.

Best for Builders opening fresh plan sets

Reduce setup time

Move past manual setup faster when the plan already gives you enough scale context.

Best for Estimators working to deadlines

Start measuring sooner

Get from upload to actual quantities without the usual setup bottleneck.

Best for Trades quoting on the fly

Catch setup mistakes early

Use the suggestion as a quicker starting point before small scale errors turn into bigger quote problems.

Best for Renovators double-checking plans

Work across more sheets

Keep momentum when you are jumping between multiple drawings in the same project.

Best for Tender takeoffs with many pages

Fall back to Manual Scaling

Swap to manual scaling when you need a hands-on check without breaking your workflow.

Best for Odd or older PDFs

Explore every feature Read the how-to guides

Measuring a printed construction plan by hand with a pencil

A printed floor plan measured with a tape measure and pencil

Boxes crammed with rolled-up paper plans

The old way

Guessing scale slows the whole takeoff down

When scale setup is clunky, everything after it gets shakier. You burn time checking title blocks, second-guessing dimensions, and reworking measurements that should have been right the first time.

Manual setup drags out every new sheet
Wrong scale assumptions can throw out a quote before you notice
Rechecking measurements later wastes time you should be pricing

Why it’s better with MetreMate

A faster start without losing confidence

Auto Scale helps you get into the real work earlier while still giving you a sensible way to verify what the plan is telling you.

Start measuring faster on every new drawing
Reduce avoidable setup mistakes before quoting
Keep takeoffs moving across multi-sheet jobs
Use Manual Scaling as a back-up when needed
Work with more confidence on busy tender deadlines

Testimonial / proof

“Been using MetreMate for a few months now, and I'm wondering how I ever managed without it. The accuracy is spot-on, and helps me and my tradies. I'm able to quote quicker and more accurately. Absolute lifesaver for every builder.”

Mina E. · Builder · Melbourne, VIC, Australia

Built for who

Built for the people doing the work

See how Auto Scale fits the way your trade already works.

Built for

Estimators

The problem

Lose time when big plan sets need the same setup process repeated again and again.

What you get

More time on pricing, less time on admin clicks.

How you'd use it: Use Auto Scale as the quickest path into takeoff, then verify where needed.

“MetreMate saved me hours on every tender. I measure three plan sets in the time it used to take me to do one.”

Sam R., Estimator

Workflows for estimators

Across the trades

How trades use Auto Scale

Auto Scale earns its keep right across the trades. Here is how different crews put it to work on real jobs.

Plumbers

Skip the scale-bar fiddling on hydraulic plans and start measuring pipe runs right away.

Workflows for plumbers

Heating & cooling technicians

Open the mechanical layout, confirm the scale, and start on duct runs and outlets.

Workflows for heating & cooling technicians

Painters

Get each sheet of a house set scaled fast, so you are measuring walls in minutes, not setting up.

Workflows for painters

Plasterers

Get floor and ceiling plans scaled fast so sheet quantities start straight away.

Workflows for plasterers

Flooring contractors

Scale each level's floor plan quickly and get straight into room areas.

Workflows for flooring contractors

Landscapers

Drop in a site plan, let MetreMate spot the scale, and get on with measuring beds and turf.

Workflows for landscapers

Roofers

Have the roof plan scaled in seconds, check one dimension, then trace each plane.

Workflows for roofers

Renovators

Use the detected scale as a starting point, then check it against a wall you trust.

Workflows for renovators

Start free View all features

Keep exploring

Related features

Manual Scaling

Set the scale by hand so you can measure unusual, scanned, or hard-to-read PDF plans with confidence.

Explore feature

Measure Tools

Measure lengths, areas, and perimeters on construction PDF plans from one browser-based workflow.

Explore feature

Auto Snap

Snap to corners, intersections, and endpoints so plan measurements stay cleaner and faster to complete.

Explore feature

Keep learning

Guides that pair with Auto Scale

Put it into practice with step-by-step how-tos from the MetreMate team.

Guide

How to set scale correctly on PDF plans

Getting the scale right is the most important step in digital plan measurement. Here is how to do it every time.

Read guide

Guide

How to Measure Floorplans the Smart Way in 2024

Ditch the printouts and scaled rulers. Upload your floorplan, auto-scale it, and measure in a few clicks.

Read guide

Tips

5 common plan measurement mistakes that blow out quotes

These five mistakes cost trades thousands on every job. Learn how to avoid them with digital measurements.

Read guide

Estimators Commercial Fit-outs Builders Electricians All guides All features

Feature FAQ

Frequently asked questions

View all FAQs

Step-by-step guide: using Set the scale

Start measuring now

No credit card to start. Built for builders and trades.

Start free View pricing