Question 1

How do you measure cladding from plans?

Accepted Answer

Cladding comes off the elevations. Set the scale, trace each facade area in square metres, deduct the openings, then convert to board linear metres using your board cover and add wastage. MetreMate totals the deducted area for every elevation.

Question 2

How many linear metres of cladding do I need from a plan?

Accepted Answer

Take the deducted facade area and divide by your board cover (the effective face width of the board). MetreMate gives you the area from the elevations so you convert to board linear metres and add around 10 to 15 percent wastage.

Question 3

Can I work cladding quantities from elevations?

Accepted Answer

Yes. Trace each elevation on its own layer, deduct the windows and doors, and MetreMate totals the wall area, so you convert to boards by cover and measure corner and trim runs in linear metres.

Question 4

How do I convert facade area to weatherboard linear metres?

Accepted Answer

Divide the deducted facade area by your board cover, the effective face height once the lap is taken off. A 180mm board with a 30mm lap covers about 150mm, so one square metre needs roughly 6.7 linear metres. MetreMate gives you the area off the elevation, and you apply the cover and wastage for the profile.

Question 5

How much wastage should I add for cladding?

Accepted Answer

Allow around 10 percent on a simple rectangular facade and 15 percent or more where there are many openings, angles or short runs that force offcuts. Measure the real elevation areas in MetreMate first, then apply the wastage that suits the facade before converting to boards or sheets.

Question 6

How do I measure corner, trim and flashing for cladding?

Accepted Answer

Measure the external and internal corners, window trims and base and head flashings as linear metre runs with the measure tool. MetreMate totals each run separately, so your soaker flashings, corner soakers and trim boards are ordered to match the facade area you have quoted.

Cladding area and board linear metres from the elevations

The slow way, or the smart way

Everything you can measure off the plan

Lengths in metres or feet

Areas in m² or sq ft

Perimeters

Counts

How cladding suppliers use MetreMate

Facade area

Boards by cover

Corners and trims

More than measuring

Auto Scale

Manual Scaling

Auto Snap

Layers Manager

Print & Share

Project Organiser

Questions cladding suppliers ask

MetreMate works for every supplier

Ready to quote faster, cladding suppliers?