How do I work out how many epoxy kits a floor needs?

Measure the floor with the Area tool, then divide by the coverage per kit on the product's data sheet for each coat. Allow a little extra for porous or uneven concrete.

Can I price coving and edges separately?

Yes. Run the Perimeter tool around the walls for coving or edge detailing, and keep it on its own layer so it is priced apart from the floor.

Does it work for flake, metallic and commercial floors?

Yes. Measure each finish or zone on its own layer, from a single garage to a warehouse with anti-slip walkways and line marking.

MetreMate for Epoxy Flooring Installers

Measure epoxy and resin floor areas from plans

Measure garage, workshop and commercial floors from PDF plans, work out primer, base coat, flake and topcoat kits, and price the prep properly.

Try MetreMate, it's free See how it works

No credit card needed. Free plan to start, works on Windows and Mac.

Why epoxy flooring installers choose MetreMate

Epoxy flooring installers use MetreMate to measure garage, workshop and commercial floors straight from the plans. Trace each floor with the Area tool, work out the primer, base coat, flake and topcoat from the coverage on the data sheet, and run the Perimeter tool for coving and edges, so you order the right number of kits and price the grinding and prep properly. It runs in your browser, so there is nothing to print and nothing to install.

See how MetreMate compares

Quote in minutes, not hours

Set the scale once and measure straight off the PDF. Your first measurement takes under 90 seconds, and it's free to start.

Try MetreMate, it's free

No credit card needed

The slow way, or the smart way

What changes when epoxy flooring installers measure in MetreMate instead of off a printout.

Without MetreMate

Pacing out garages and warehouses to measure floors
Running short of resin or flake halfway through a job
Leaving coving, edges and joints out of the price

With MetreMate

Area tool for coating areas
Perimeter tool for coving and edge detailing
Measure tool for joints, cracks and line marking
Count tool for drains, columns and bollards
Layers Manager to separate flake, metallic and anti-slip zones
Pencil tool for freehand mark-ups, and to add your initials or signature by hand

Everything you can measure off the plan

Set the scale once, then pull the quantities epoxy flooring installers actually quote on.

Lengths in metres

Any wall, run or edge measured straight off the plan.

Areas in square metres

Trace rooms, slabs and roofs for instant areas in m².

Perimeters

Boundary and edge runs totalled for you, no maths.

Counts

Tap to count fixtures, fittings, and symbols with live totals.

Step by step

How epoxy flooring installers use MetreMate

1
Floor area takeoff
Use the Area tool to measure every floor to be coated, from a double garage to a warehouse, and leave out plinths and fixed equipment.
2
Kits, flake and topcoat
Divide each area by the coverage on the product's data sheet to work out the primer, base coat, flake and topcoat for every coat.
3
Coving, edges and joints
Run the Perimeter tool for coving and edge detailing, the Measure tool for saw cuts, cracks and line marking, and the Count tool for drains and bollards.

Read our how-to guides