Can I measure ceiling and roof areas for bulk insulation?

Yes. Measure ceiling and roof areas straight from the plan to total the bulk insulation quantity, rather than estimating from room dimensions.

Can I measure wall insulation with openings deducted?

Measure external wall areas and subtract the openings to get the net area for wall insulation, so your batt and roll counts are accurate.

Will it help me order the right amount?

Because you measure real areas and convert them to batts and rolls, you avoid the over- and under-ordering that comes from rough guesses on complex plans.

How do I work out batt quantities from a measured area?

Measure the wall or ceiling area in square metres, then divide by the coverage of your batt pack for that R-value to get the number of packs. MetreMate totals the areas as you go, so the pack count is a quick step from there.

Can I keep ceiling, wall, and underfloor areas separate?

Yes. Put each element on its own layer as you measure, so ceiling, external wall, and underfloor areas total on their own. That lets you order the right product and R-value for each without mixing the quantities.

How accurate is measuring insulation areas off the plan?

As accurate as the drawing. With the scale set and openings deducted, your net areas match the plan, so your batt and roll counts are reliable rather than an allowance off rough room sizes.

MetreMate for Insulation Installers

Measure insulation areas from plans

Measure wall, ceiling, and underfloor areas to calculate insulation batts and rolls straight from building plans.

Try MetreMate, it's free See how it works

No credit card needed. Free plan to start, works on Windows and Mac.

Under 90s to your first measurement

Why insulation installers choose MetreMate

Insulation installers use MetreMate to measure wall, ceiling, and underfloor areas from building plans and turn them into batts and rolls with less wastage. Use the Area tool for insulation quantities and sarking coverage, or the Measure tool for metres of sarking roll. It runs in your browser, so you can quote from the plan without estimating off rough room sizes.

See how MetreMate compares

Quote in minutes, not hours

Set the scale once and measure straight off the PDF. Your first measurement takes under 90 seconds, and it's free to start.

Try MetreMate, it's free

No credit card needed

The slow way, or the smart way

What changes when insulation installers measure in MetreMate instead of off a printout.

Without MetreMate

Estimating insulation areas from rough room sizes
Missing walls or ceilings on complex plans
Over- or under-ordering batts and rolls

With MetreMate

Area tool for insulation quantities with less wastage
Area tool for sarking coverage
Count tool for openings
Layers Manager to organise by level
Pencil tool for freehand mark-ups, and to add your initials or signature by hand

Everything you can measure off the plan

Set the scale once, then pull the quantities insulation installers actually quote on.

Lengths in metres

Any wall, run or edge measured straight off the plan.

Areas in square metres

Trace rooms, slabs and roofs for instant areas in m².

Perimeters

Boundary and edge runs totalled for you, no maths.

Counts

Tap to count fixtures, fittings, and symbols with live totals.

Step by step

How insulation installers use MetreMate

1
Ceiling and roof area
Measure ceiling and roof areas for bulk insulation quantities.
2
Walls and sarking
Measure wall areas with openings deducted, and use the Area tool for sarking coverage, or the Measure tool for metres of roll.
3
Material estimation
Convert measured areas into batt and roll quantities for ordering, with less wastage.

Read our how-to guides