MetreMate

MetreMate for Countertop Fabricators

Countertop square footage and edge length from the kitchen plan

Trace countertops and islands for square footage, measure finished edges and backsplash in linear feet, and count cutouts for a fast budget quote.

Try MetreMate, it's free See how it works

No credit card needed. Free plan to start, works on Windows and Mac.

White marble-look countertop island and full-height backsplash in a kitchen under pendant lights
Under 90s to your first measurement

Why countertop fabricators choose MetreMate

Countertop Fabricators use MetreMate to price countertops off a customer's PDF kitchen plans before anyone templates. Set the scale, trace each run and island for square feet, measure finished edges and backsplash in linear feet, and count sink and cooktop cutouts. Then apply your slab layout and pricing to build the budget quote. It runs in any modern browser on Windows or Mac, with nothing to install.

See how MetreMate compares

Quote in minutes, not hours

Set the scale once and measure straight off the PDF. Your first measurement takes under 90 seconds, and it's free to start.

Try MetreMate, it's free

No credit card needed

The slow way, or the smart way

What changes when countertop fabricators measure in MetreMate instead of off a printout.

Without MetreMate

  • Budget quotes that tie up an estimator before there is a job to template
  • Islands that tip the job into a second slab and nobody caught it
  • Edge, backsplash and cutout counts missed on the first quote

With MetreMate

  • Area tool for countertop square footage by run and island
  • Measure tool for finished edges and backsplash in linear feet
  • Count tool for sink, cooktop and faucet cutouts
  • Layers to keep runs, islands, edges and backsplash totals separate

Everything you can measure off the plan

Set the scale once, then pull the quantities countertop fabricators actually quote on.

Lengths in linear feet

Any wall, run or edge measured straight off the plan.

Areas in sq ft

Trace rooms, slabs and roofs for instant square footage.

Perimeters

Boundary and edge runs totaled for you, no maths.

Counts

Tap to count fixtures, fittings, and symbols with live totals.

Step by step

How countertop fabricators use MetreMate

  1. 1

    Square footage by run

    Trace each countertop run and the island with the Area tool. Each piece gets its own square footage, ready for your per-square-foot price.

  2. 2

    Slab check

    Measure the longest run and the island and check them against a standard quartz slab of about 120 x 55 in or a jumbo of about 130 x 65 in. Anything that will not fit gets a seam or a second slab before the quote goes out.

  3. 3

    Edges, backsplash and cutouts

    Measure finished edges, mitered edge build-ups and backsplash in linear feet, and count sink, cooktop and faucet cutouts with the Count tool, so the first quote covers them all.

Read our how-to guides

More than measuring

Auto-scaling, layers, and exports that keep the whole job moving. Tap any tool to see how it works.

Auto Scale

Start measuring sooner with plan scale suggestions

Speed up plan setup by detecting likely scale values so you can move into measurement faster.

Manual Scaling

Set PDF plan scale with confidence before you bid

Set the scale by hand so you can measure unusual, scanned, or hard-to-read PDF plans with confidence.

Auto Snap

Snap to plan points for faster, cleaner measurements

Snap to corners, intersections, and endpoints so plan measurements stay cleaner and faster to complete.

Layers Manager

Keep plan measurements organized by room, trade, or scope

Group measurements into layers so busy plans stay easier to review and manage.

Print & Share

Share measured plans and print clean markups without the back-and-forth

Print measured plans and share marked-up work more clearly with clients, teams, and subcontractors.

Project Organizer

Keep projects, plans, and measurements organized in one place

Organize projects and plan sets so jobs stay easier to navigate as your quoting workload grows.

See all features

Countertop Fabricators FAQs

Questions countertop fabricators ask

View all FAQs Read the guides

MetreMate works for every supplier

Carpet RetailersLumberyards and Building SupplyTile ShowroomsFlooring RetailersRoofing Supply DistributorsDrywall Supply YardsLandscape Supply YardsDecking Suppliers
View all suppliers

Ready to quote faster, countertop fabricators?

Upload your first plan and get accurate measurements in under 90 seconds. Free to start, no credit card needed.

Try MetreMate Today, It's Free!