Can I work out screed volume from a plan?

Yes. Measure the floor area with the Area tool, then multiply by the screed depth to get the volume of material to order.

Can I keep wet areas and set-downs separate?

Yes. Put them on their own layers so each area and depth is priced on its own.

Do I need to print the plans?

No. Upload the PDF and measure on screen, with nothing to install.

MetreMate for Screeders

Measure screed areas from plans

Measure floor screed areas from PDF plans, work out the material and labour to price, and waste less.

Try MetreMate, it's free See how it works

No credit card needed. Free plan to start, works on Windows and Mac.

Under 90s to your first measurement

Why screeders choose MetreMate

Screeders use MetreMate to measure floor screed areas straight from the plans. Use the Area tool for every floor to be screeded, multiply by your screed depth for the material, and price the labour to lay it, so you waste less and protect your profit. It runs in your browser, so there is nothing to print and nothing to install.

See how MetreMate compares

Quote in minutes, not hours

Set the scale once and measure straight off the PDF. Your first measurement takes under 90 seconds, and it's free to start.

Try MetreMate, it's free

No credit card needed

The slow way, or the smart way

What changes when screeders measure in MetreMate instead of off a printout.

Without MetreMate

Estimating screed areas from rough room sizes
Over-ordering sand and cement
Pricing labour without accurate areas

With MetreMate

Area tool for screed areas
Layers Manager for wet areas and set-downs
Manual Scaling from any known dimension
Snapping for clean room outlines
Pencil tool for freehand mark-ups, and to add your initials or signature by hand

500+

Trade businesses using MetreMate

50,000+

Measurements taken

90s

Average time to measure

Everything you can measure off the plan

Set the scale once, then pull the quantities screeders actually quote on.

Lengths in metres or feet

Any distance, edge, or run measured straight off the plan.

Areas in m² or sq ft

Trace rooms, slabs, and zones for instant areas.

Perimeters

Boundary and edge runs totalled for you, no maths.

Counts

Tap to count fixtures, fittings, and symbols with live totals.

Step by step

How screeders use MetreMate

1
Floor area takeoff
Use the Area tool to measure every room and floor to be screeded.
2
Material and labour
Multiply the areas by your screed depth to work out the material, and price the labour to lay it.
3
Falls and set-downs
Keep wet areas, falls, and set-downs on their own layers so each one is priced right.

Read our how-to guides